Зміст:
Why is my JVC radio saying protect?
"Protection mode" usually indicates a problem with the speakers or speaker wiring, or possibly the amplifier.
How to remove protect mode from JVC amplifier?
Try unplugging the unit for 60 minutes, then plug back in and try it again. This will reset the processor and hopefully the unit will operate normally. Check all the speaker wiring for shorts, make sure they're also not touching the chassis of the receiver, or are not otherwise pinched or frayed.
How do you reset the JVC KW xr610?
Reset unit by pressing the “RESET” button located in front of face plate.
How to get JVC off demo mode?
To cancel “DEMO'' mode on the JVC: Enter the PSM (personal settings mode) and turn DEMO off. 1) Press and hold “SEL'' until the display changes. 2) Use the left/right rocker switch until “DEMO ON'' is displayed. 3) Turn the volume knob to select “DEMO OFF''. 4) Press “SEL'' to exit. Thanks!!
Jvc protect reset /jvc protect problem – YouTube
https://youtu.be/RG4e02YR-UEjvc reset https://youtu.be/i6wmEq9OFskhttps://youtu.be/NsmkG_3ScoM
JVC Car Stereo Protect Mode [3 Ways to Fix Permanently]
The first thing you can do is disconnect and then re-connect all of the components. This includes the speakers, subwoofers, amplifiers, etc. Sometimes, this can solve the problem as it will reset all of the connections. Before attempting to disconnect all the components, I recommend trying a simple car battery disconnection first. …
How Do I Get My JVC Radio Out of Protect Mode?
You can get your JVC radio out of protection mode by removing all speakers, subs, and amps from it and then reconnecting them again one by one. This way, you can identify the …
Простые и эффективные способы избавиться от …
Если у вас возникла проблема с активацией Protect на магнитоле JVC, не волнуйтесь! В этой статье мы разберемся, как снять защиту Protect на магнитоле JVC с …